Kingston - Medusa 5.6

Home of Welsford's Cochrane Lane Cliffs.

Moderators: PeterA, chossmonkey, Stacey, Dom, granite_grrl, Greg, Joe

Kingston - Medusa 5.6

Postby Rick » Mon Jul 27, 2015 8:57 am

The first hanger on Medusa at the Kingston Crag popped off this weekend. The washer and hanger are sitting at the bottom of the route, couldn't find the nut (which spun off; the bolt is still in the rock). Just a heads up.
Rick
 
Posts: 5
Joined: Mon Jul 27, 2015 8:52 am

Re: Kingston - Medusa 5.6

Postby comforteagle » Mon Jul 27, 2015 11:20 am

Image
comforteagle
 
Posts: 10
Joined: Thu Jun 04, 2015 3:52 pm

Re: Kingston - Medusa 5.6

Postby JonA » Tue Jul 28, 2015 8:33 am

Hope no one was on it at the time. That's a good reminder to everyone that bolts are not magic safe points, they are equipment that has been sitting outside for however many years, and when you clip a bolt you should be inspecting it to make sure it is not overly rusty, not damaged, not loose etc... it is not a bad idea to carry a small 9/16" wrench in your bag to snug up any spinners you find.

Also not a bad idea around here to bring a wire brush and give dirty routes a quick touchup on the way down, it helps everyone.
I just want to climb.
User avatar
JonA
 
Posts: 46
Joined: Mon Nov 06, 2006 2:48 pm

Re: Kingston - Medusa 5.6

Postby Rick » Tue Jul 28, 2015 9:54 am

One of us was on it, luckily a few bolts above it by the time it popped off. But yeah, great reality check opportunity.
Rick
 
Posts: 5
Joined: Mon Jul 27, 2015 8:52 am

Re: Kingston - Medusa 5.6

Postby Rick » Thu Aug 20, 2015 9:33 am

This has been fixed (thanks Eric and Kurt).
Rick
 
Posts: 5
Joined: Mon Jul 27, 2015 8:52 am


Return to New Brunswick

Who is online

Users browsing this forum: No registered users and 13 guests