Rusty bolts in Cochrane Lane

Home of Welsford's Cochrane Lane Cliffs.

Moderators: PeterA, chossmonkey, Stacey, Dom, granite_grrl, Greg, Joe

Rusty bolts in Cochrane Lane

Postby Dom » Mon May 30, 2011 11:32 am

Hey all, there is a ton of routes with rusty bolts in Welsford. I think at this point it should be a community thing to replace them. I'll be rebolting some routes in the near future. It would be nice if others would do the same. Don't forget that you climb on these bolts for free. If you want to help but don't have the experience/time/knowledge, you could find someone who is willing to rebolt and give them a bit of money for hardware costs.

If you think rusty bolts are fine, Well, when I rebolted Telefunken a couple years ago, on the 3rd bolt I tightened a quarter turn and it snapped! QUARTER TURN! That bolt would NOT have held a whipper! And these sketchy corroded bolts are all over the place in Cochrane Lane.

Anyways, I suggest we start a thread where we list all of the routes that are in dire need of replacement hardware.

-Pursuit of hapiness (1 bolt)
-Waterfall arête
-Montezuma's
- Spiderman (1 bolt)
-Dykes on bikes (1 bolt)
-Rock Opera
-The Central Scrutinizer
-Perfect
-Shredded wheat (1 bolt)
-Joint venture
-Witches
-Talamasca
-Be still my bleeding heart
-Tweety bird
-Taz
-Bugs Bunny
-Yosemite Sam
-Trouble with Lichen
-Farewell to arms
-The Juggler

These are all the ones I can think of for now. If you know of any other please add them to the list.

The beautiful thing about replacing these bolts, is that the new ones will be Stainless steel and last a whole lot longer. Take It's about time 5.9+ for example. It was bolted 12 years ago and the bolts look brand new on it.
So much rock, so little time
User avatar
Dom
 
Posts: 889
Joined: Thu Oct 27, 2005 1:28 pm
Location: Oromocto West

Re: Rusty bolts in Cochrane Lane

Postby theriault » Mon May 30, 2011 11:44 am

Good Initiative Dom,
I would add Leviathan (2 firts bolts)
this route gets gets its fair share of traffic!
Marty
User avatar
theriault
 
Posts: 542
Joined: Tue Mar 01, 2005 9:04 am
Location: Oromocto

Re: Rusty bolts in Cochrane Lane

Postby Adam » Mon May 30, 2011 1:07 pm

agreed. i don't want to lead central scrutinizer till they're replaced lol. Stef has weakened them enough in the past few years :)
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: Rusty bolts in Cochrane Lane

Postby Stef » Mon May 30, 2011 7:33 pm

Yah, I logged more than my fair share of whippers on every one of those bolts. I bought some new hardware with the intention of re-bolting but haven't had the time. I am gone all summer but if anyone want those bolts for Central or any other route, you are welcome to them; otherwise I'll get to it in the fall. I also spoke to Karel and he had no problem with replacing the bolts on his routes in general.

I'd add the bolt anchor on the Sparky Start Ledge to that list as well.
Stef
 
Posts: 163
Joined: Thu Jun 23, 2005 9:55 am

Re: Rusty bolts in Cochrane Lane

Postby motanb » Wed Jun 01, 2011 1:17 pm

I feel obliged to include 'grandpa's demise' located on Pooh's Corner. Those bolts are now nearly 20 years! Considering the beauty of the line this route deserves some retro-bolting tlc too.
Thomas

"When you get to the top.... Keep climbing"

~ JaphyRyder
motanb
 
Posts: 172
Joined: Tue Oct 24, 2006 10:26 am
Location: Saint John, NB

Re: Rusty bolts in Cochrane Lane

Postby Burley » Fri Jun 03, 2011 6:46 am

I have a handful of hardward to donante to the cause... and some sweat equity I'm willing to part with.
Burley
 
Posts: 270
Joined: Mon Feb 27, 2006 1:37 pm
Location: Fredericton

Re: Rusty bolts in Cochrane Lane

Postby cory » Sun Jun 05, 2011 9:14 pm

A big THANK YOU to Dom and Luc who bolted (with permission from the FAist) two existing TR's on Upper Tier, for which we will give them some time to get the FFA's: Stinky Bum and Flux Capacitor.

And a bigger THANK YOU for replacing the rusted bolts on Motezuma's, and Joint Venture, as well as installing a chain anchor on the latter.
User avatar
cory
 
Posts: 316
Joined: Sun Feb 20, 2005 2:07 pm
Location: SJ

Re: Rusty bolts in Cochrane Lane

Postby Adam » Sun Jun 05, 2011 9:44 pm

wow awesome thanks guys!
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: Rusty bolts in Cochrane Lane

Postby Dom » Mon Jun 06, 2011 8:22 am

As Cory has said, Luc and I bolted Stinky bum and Flux Capacitor. The first one we both got it clean but the 2nd one is def. harder than 5.11b and we'll need a little more time. I'll post about them in another thread.

Like you said, we rebolted Joint venture and added a chain anchor on the final ledge.
Montezuma's was rebolted by headlamp with the coyotes howling!

Also, We rebolted Shredded wheat (1bolt) and trouble with lichen.

We did our best to put the new bolt no further than 10cm away from the original but in a couple of cases we had to install them a little further as the original bolts were in hollow rock :shock: .
The old bolts were chopped and epoxy putty was used to cover them up.

The bolts on Trouble with lichen were nearly rusted through and were in pretty bad shape. On the other hand, the two bolts on Montezuma's were in relatively good shape considering they've been there for a while. Still pretty rusted up though.

So now that these routes all have bomb-proof bolts, nobody has an excuse to shy away from the dyno of Trouble with Lichen :mrgreen:
So much rock, so little time
User avatar
Dom
 
Posts: 889
Joined: Thu Oct 27, 2005 1:28 pm
Location: Oromocto West

Re: Rusty bolts in Cochrane Lane

Postby *Chris* » Mon Jun 06, 2011 8:29 am

Nice work Dom & Luc!
User avatar
*Chris*
 
Posts: 848
Joined: Wed Apr 19, 2006 2:32 pm
Location: Fredericton

Re: Rusty bolts in Cochrane Lane

Postby rckclmr » Tue Jun 07, 2011 10:49 pm

Boys and Girls I have some hangers I can donate.. just contact me.

rckclmr@nbnet.nb.ca

Robert
rckclmr
 
Posts: 8
Joined: Tue Jun 07, 2011 10:39 pm

Re: Rusty bolts in Cochrane Lane

Postby Rob L » Wed Jun 22, 2011 1:05 pm

I will pony up $$ for routes associated to my name if someone replaces them. Joint Venture, Rock Opera etc..
Let me know how many bolts were replaced, who did it and where to give the cash.
Rob L
 
Posts: 14
Joined: Tue Oct 25, 2005 10:02 am
Location: St. Andrews

Re: Rusty bolts in Cochrane Lane

Postby Dom » Thu Jun 23, 2011 11:30 am

Rob L wrote:I will pony up $$ for routes associated to my name if someone replaces them. Joint Venture, Rock Opera etc..
Let me know how many bolts were replaced, who did it and where to give the cash.


Hi Rob L. great to see you want to get involved.
I got your email adress through Stacey and will be sending you a message shortly.

Also, SteveK has donated 20 bolts and hangers to the cause and Robert will be giving us some hangers.
Burley, we'll use you help and hardware anytime!

Thanks Guys!

Now let's go over the list again and see if any other routes are in dire need of bolt replacement.

-Leviathan
-Pursuit of hapiness (1 bolt)
-Waterfall arête
-Montezuma's rebolted
- Spiderman (1 bolt)
-Dykes on bikes (1 bolt)
-Rock Opera
-The Central Scrutinizer
-Perfect
-Shredded wheat (1 bolt) rebolted
-Joint venture rebolted, anchor added
-Witches
-Talamasca
-Be still my bleeding heart
-Tweety bird
-Taz
-Bugs Bunny
-Yosemite Sam
-Trouble with Lichen rebolted
-Farewell to arms
-The Juggler
-Grandpa's demise
-Spark start (anchor)

I feel another rebolting session is coming up. With all this rain it's not like we can climb anyways :lol:
So much rock, so little time
User avatar
Dom
 
Posts: 889
Joined: Thu Oct 27, 2005 1:28 pm
Location: Oromocto West

Re: Rusty bolts in Cochrane Lane

Postby PeterA » Thu Jun 23, 2011 10:32 pm

The anchors on Flight of the valkyries are lookin a bit rough

-PJ
User avatar
PeterA
 
Posts: 363
Joined: Mon Oct 23, 2006 4:33 pm

Re: Rusty bolts in Cochrane Lane

Postby Dom » Fri Jun 24, 2011 9:55 am

Hey Pj, I had heard about the anchors of Flight of the valkyries beeing a little sketchy. Once the amphitheatre opens back up, I'll make sure to replace them as this route is definitely on my tick list.

As for anchors, there are a fair bunch of anchors that are looking rough in CL. I dunno what anchor set-up it is on FOTV, but a lot of routes have Metolius rap hangers. These hangers are made of 1018 mild steel and are NOT Stainless Steel. In a way, it's good as there was no mixing of SS with non-SS. but it means It's not only the expansion bolt that has been weakened by corrosion but also the hanger. So People be cautious when using these and make sure you rap. Lowering off them would be more dangerous and would fill your rope with rust. So if you climb with partners that continuously forget bringing their ATC, lend them yours! :mrgreen: (Some people will know who I'm talking about, for others his name starts with Luc and finishes with Luc) hehehe :wink:

Routes that have these anchors:
Talamasca
Be still my bleeding heart
Witches
Sparky Start variation
Never ending story
Rock Opera
Sleeping beauty
Prob. more...

We will be replacing them with the standard fixe rap ring anchors. If you have some rap rings kicking around please consider donating them. They won't do no good collecting dust at home.
Image

Right now we have 8 fixe rap rings so good for 4 anchors.

Also, The chain on the Joint venture tree is still there doing nothing so We'll go back up there to get it and use it as fixed gear on potential anchors...
So much rock, so little time
User avatar
Dom
 
Posts: 889
Joined: Thu Oct 27, 2005 1:28 pm
Location: Oromocto West

Re: Rusty bolts in Cochrane Lane

Postby Adam » Fri Jun 24, 2011 10:34 am

i know it is standard practice in other regions, but at cochrane lane (and IMHO by extension every other cragg in NB) NO ONE should be lowering off the anchor's hangers/rap rings/chain/etc....

unless there are cold shuts on an anchor, rap off. this isnt' rumney where routes are too overhung to retrieve your gear/draws which necessitate lowering off the anchor direct.
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: Rusty bolts in Cochrane Lane

Postby Dom » Fri Jun 24, 2011 10:59 am

Adam wrote:i know it is standard practice in other regions, but at cochrane lane (and IMHO by extension every other cragg in NB) NO ONE should be lowering off the anchor's hangers/rap rings/chain/etc....

unless there are cold shuts on an anchor, rap off. this isnt' rumney where routes are too overhung to retrieve your gear/draws which necessitate lowering off the anchor direct.


Although I agree with you in theory, there are times when I lower off, even in CL. It's definitely much better for your rope to rap though. (won't run over edges, won't coil like mad)

BUT Lowering can be safer for a number of reasons.
1. In general, People in NB don't use a prusik or a firemen to rappel.
2. At the anchor, you don't have to undo your knot until your new knot is complete. see: http://www.petzl.com/files/all/en/activities/sport/tech-tips-sport-climbing_Catalog-2010.pdf (last page)

That beeing said, I reiterate that I agree that rappelling is the norm, lowering the exception. I think it's a judgement call and if you hesitate or have doubts then you should rap!
So much rock, so little time
User avatar
Dom
 
Posts: 889
Joined: Thu Oct 27, 2005 1:28 pm
Location: Oromocto West

Re: Rusty bolts in Cochrane Lane

Postby Dom » Mon Jun 27, 2011 9:45 am

I rebolted Spiderman (1 bolt) and Sparky Start variation (1 bolt) yesterday.

I also, rebolted the anchor on sleeping beauty (installed fixe rap rings) and rebolted the last crux bolt. I will rebolt the rest of the route but I didn't have enough battery juice to finish it yesterday. Rob L. is sponsoring this route.

Also,
Stef wrote:I'd add the bolt anchor on the Sparky Start Ledge to that list as well.


Which anchor do you mean Stef? I figure you meant the one on top of Never ending story? Anyways I led up Sparky start with the drill and everything, got to the nice convenient anchor Fred installed on top of Waterwalk and figured you meant the one for Never ending story so I traversed this slimy bushwack to get to it. Was I ever surpised to see that the anchor bolts are Stainless steel and are fine! On the other hand, the Metolius rap hangers are mild steel and with the mixing of metals they are already in bad shape. So I replaced the hangers with Fixe Rap rings. Now it's stainless bolts with stainless hangers+rings.

I took a bunch of pictures yesterday with my phone but I can't seem to find the attachment to plug it on my computer. When I do, I'll post pictures of the rebolting.
So much rock, so little time
User avatar
Dom
 
Posts: 889
Joined: Thu Oct 27, 2005 1:28 pm
Location: Oromocto West

Re: Rusty bolts in Cochrane Lane

Postby Adam » Mon Jun 27, 2011 9:58 am

thanks for doing all this work Dom! would really be nice to see some non-'FA' people step up with some cash for this effort too! :)
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: Rusty bolts in Cochrane Lane

Postby theriault » Mon Jun 27, 2011 10:09 am

Adam wrote:would really be nice to see some non-'FA' people step up with some cash for this effort too! :)


+1
Marty
User avatar
theriault
 
Posts: 542
Joined: Tue Mar 01, 2005 9:04 am
Location: Oromocto

Re: Rusty bolts in Cochrane Lane

Postby Dom » Mon Jun 27, 2011 2:59 pm

Random pic of the rebolting yesterday
Image

More can be found here:
https://picasaweb.google.com/100687177024103660261/Rebolting


Disclaimer: This is not a guide on how to properly rebolt. It's just pictures...

Make sure to use the slideshow.
So much rock, so little time
User avatar
Dom
 
Posts: 889
Joined: Thu Oct 27, 2005 1:28 pm
Location: Oromocto West

Re: Rusty bolts in Cochrane Lane

Postby anderfo » Mon Jun 27, 2011 3:11 pm

PS. I noticed that you had to break the bolt to get rid of it.
Isn't it common to drill the hole deeper than the bolt, so that when you want to get rid of the bolt you can just knock it in until you don't see it any more?
A bunch of photos
My home crag is Hell (and, yes, I've seen Hell freezing over...)
User avatar
anderfo
 
Posts: 119
Joined: Fri May 23, 2008 4:45 am
Location: Trondheim, Norway

Re: Rusty bolts in Cochrane Lane

Postby Dom » Mon Jun 27, 2011 3:20 pm

anderfo wrote:PS. I noticed that you had to break the bolt to get rid of it.
Isn't it common to drill the hole deeper than the bolt, so that when you want to get rid of the bolt you can just knock it in until you don't see it any more?


Yes Anders. That is what I do when I bolt. In this specific case though, The metolius rap hangers used in conjunction with these bolts are so damn wide and as a result a lot of the bolt is sticking out. I figured the hole wasn't that deep so I didn't check. It seems like the end result is the same.
So much rock, so little time
User avatar
Dom
 
Posts: 889
Joined: Thu Oct 27, 2005 1:28 pm
Location: Oromocto West

Re: Rusty bolts in Cochrane Lane

Postby *Chris* » Tue Jun 28, 2011 10:12 pm

I'll add that the station at the top of Reindeerland is in terrible shape. The hangers are stainless and in good shape but the bolts and chain are badly corroded. I will commit to rebolting this station.
User avatar
*Chris*
 
Posts: 848
Joined: Wed Apr 19, 2006 2:32 pm
Location: Fredericton

Re: Rusty bolts in Cochrane Lane

Postby *Chris* » Wed Jun 29, 2011 12:28 pm

Recent efforts in bolting have started to catch up with the Rock & Ice club's drills. Both are out of commission. We're looking into repair costs but they could be down for a while. :( The club exec will have to decide on what to do when we hear on costs. I'd estimate they've be used for several hundred bolts in NB!

In the meantime, I'm wondering about who else has drilling capacity... and whether they're willing to lend equipment? I've got bits, studs, and hangers waiting to go!
User avatar
*Chris*
 
Posts: 848
Joined: Wed Apr 19, 2006 2:32 pm
Location: Fredericton

Re: Rusty bolts in Cochrane Lane

Postby theriault » Mon Jul 04, 2011 8:05 am

Luc and I rebolted and added an anchor (2x maillon + 2x perma lockers) to Farewell to Arms
Marty
User avatar
theriault
 
Posts: 542
Joined: Tue Mar 01, 2005 9:04 am
Location: Oromocto

Re: Rusty bolts in Cochrane Lane

Postby martha » Tue Jul 05, 2011 3:02 pm

*Chris* wrote:I'll add that the station at the top of Reindeerland is in terrible shape. The hangers are stainless and in good shape but the bolts and chain are badly corroded. I will commit to rebolting this station.



I don't often have much to say on here anymore (*gasp*) but I will say that when the Reindeerland anchor gets replaced, Please PLEASE keep it on top of the block. Topping out Reindeerland and taking a moment on the 'best seat in the house' is probably the coolest thing about that route, and is certainly a right of passage for so many newcombers.

Thanks to all of you guys who have been putting in so much effort to keep Cochrane lane safe and clean. I'll be sure to get Fred to add some extra anchors/bolts on his next MEC order to donate to the cause.
The phrase "working mother" is redundant. ~Jane Sellman

If a husband speaks in the woods, and his wife is not there to hear him...is he still wrong?
martha
 
Posts: 2105
Joined: Wed Oct 20, 2004 9:40 am
Location: planning the next climbing trip....

Re: Rusty bolts in Cochrane Lane

Postby granite_grrl » Wed Jul 06, 2011 7:44 am

Dom wrote:
Adam wrote:i know it is standard practice in other regions, but at cochrane lane (and IMHO by extension every other cragg in NB) NO ONE should be lowering off the anchor's hangers/rap rings/chain/etc....

unless there are cold shuts on an anchor, rap off. this isnt' rumney where routes are too overhung to retrieve your gear/draws which necessitate lowering off the anchor direct.


Although I agree with you in theory, there are times when I lower off, even in CL. It's definitely much better for your rope to rap though. (won't run over edges, won't coil like mad)

BUT Lowering can be safer for a number of reasons.
1. In general, People in NB don't use a prusik or a firemen to rappel.
2. At the anchor, you don't have to undo your knot until your new knot is complete. see: http://www.petzl.com/files/all/en/activities/sport/tech-tips-sport-climbing_Catalog-2010.pdf (last page)

That beeing said, I reiterate that I agree that rappelling is the norm, lowering the exception. I think it's a judgement call and if you hesitate or have doubts then you should rap!

When I was climbing a CL a couple of seasons ago rapping made sense to me, but this was because of the placement of the rap hangers, not the worry about the gear it's self. I was very surprised to hear it recommended that everyone always rap, even off the sport routes in the province (with what I would assume would be well placed rap hangers).

I think that Dom outlined it fairly well, I think that lowering is safer. Another safety reason is that you don't have to untie when you lower vs the whole process of setting up a rappel.

Of course one should always follow local practices when in a new area, and I always honour that, but if your concern is about wearing out hardware I think the point is moot (or it would take 40 years+ in your area before it might be a concern).
User avatar
granite_grrl
 
Posts: 925
Joined: Wed Oct 27, 2004 2:56 pm
Location: St. Catharines, ON

Re: Rusty bolts in Cochrane Lane

Postby granite_grrl » Wed Jul 06, 2011 7:49 am

I also wanted to tell you guys that it's pretty col that you're out there trying to update all your bolts to stainless. I've whipped on too many rusty bolts out in Ontario and there are a lot of road blocks in this province to getting them replaced. It's nice to see a community getting this done.
User avatar
granite_grrl
 
Posts: 925
Joined: Wed Oct 27, 2004 2:56 pm
Location: St. Catharines, ON

Re: Rusty bolts in Cochrane Lane

Postby *Chris* » Wed Jul 06, 2011 8:10 am

granite_grrl wrote:Of course one should always follow local practices when in a new area, and I always honour that, but if your concern is about wearing out hardware I think the point is moot (or it would take 40 years+ in your area before it might be a concern).


Agree 100%. I think our anchors would rust long before those huge stainless rings ever show wear from lowering. That said... I rap every time for fear of getting my knuckles rapped. FYI... more and more of the popular sport routes are getting perma-biners at the anchors. When they wear... they're easy to replace.
User avatar
*Chris*
 
Posts: 848
Joined: Wed Apr 19, 2006 2:32 pm
Location: Fredericton

Next

Return to New Brunswick

Who is online

Users browsing this forum: No registered users and 48 guests

cron